New ceiling fan installation

Make sure that the cubic feet of air that the fan moves per minute cfm , measured at high speed, is near the top of its class. Some inch fans, for instance, rate as low as 2, cfm, while others reach 7, High-cfm fans not only provide a better breeze, they usually have robust motors that will last longer and run more quietly.

Steer clear of hanging the fan too close to any lights, as rotating blades under a bulb will create an annoying flicker.

Tip : If you're going to paint the medallion, do it before installing the ceiling plate. Tip: The pipe's threads have a factory-applied coating. Don't remove this coating; it keeps the pipe from unscrewing.

Looking for help with repairs around your home? A home warranty may help. Cookie banner We use cookies and other tracking technologies to improve your browsing experience on our site, show personalized content and targeted ads, analyze site traffic, and understand where our audiences come from. By choosing I Accept , you consent to our use of cookies and other tracking technologies. Ceiling Fan Installation: 8 Steps to Cool. By Joseph Truini.

Pinterest Email Pocket Flipboard. Alamy The popularity of ceiling fans continues to grow as more and more homeowners discover dramatic, year-round energy savings. Remove the Existing Light Fixture Make sure electricity to circuit is turned off and carefully remove the glass shade or globe from the old light fixture.

Unscrew the retaining nut or screws that hold the fixture to the ceiling. Lower the fixture and disconnect the wires by twisting off the plastic connectors from the ends of the wires. If it's nailed to a joist, pry it free with a flat bar. If it's suspended from a bar, you may have to take off a metal plate to unscrew the box; then pry the bar from the joists. Cut along the line with a drywall saw.

Tip : Hold a vacuum cleaner wand next to the saw to catch the dust. Attach New Electrical Box Feed the electrical cable coming from the ceiling through the knockout hole in the pancake box. Using wire cutters, cut the wires, leaving 8 inches of wire from the top of the downrod. Pick the fan up by its downrod or housing and insert the downrod ball into the slot of the ceiling bracket. When installing a low profile fan, you can mount the motor and wire it without the use of a downrod or canopy.

While keeping the wires out of the way, lift the motor assembly and slide the square hanging ball into the opening in the ceiling bracket. Locate the ground wire that's attached to the top of the motor shaft. Make sure the ground wire is facing out of the large opening of the ceiling bracket. Secure the motor to the ceiling bracket with two locking screws.

Slightly tug on the wire to make sure none of the wires are loose. Pull chain ceiling fans do not come with a remote receiver of any type. For ceiling fans without a remote receiver, follow these steps to wire your fan. Connect the white grounded wire from the ceiling to the white wire from the fan.

Connect the black wire ungrounded from the ceiling to the black and the blue wires from the fan. Connect the black ungrounded wire from the ceiling to the black wire from the fan.

Connect the second ungrounded light wire from the ceiling to the blue wire from the fan. Hunter ceiling fans with preinstalled remote receivers have the receiver built into the ceiling fan body at the factory.

Our engineers innovated this technology to help make wiring a ceiling fan simpler. The remote control cradles can be attached to the wall. You can dock the remotes into the cradles to use them like a switch on the wall, or remove the controls from the cradle and use them as handheld remotes. The light switch powering the ceiling fan will likely be a single or a dual wall switch.

Cap the blue wire from the fan. You will not need it for single switch wiring. If you have a dual wall switch, the steps for connecting the wires with a wire nut will be similar to the above steps. The only difference is instead of capping the end of the blue wire in step 4, you'll use a wire nut to connect the second ungrounded light wire from the ceiling to the blue wire from the fan. Most Hunter ceiling fans come equipped with either a preinstalled or separate remote receiver.

If you're wondering how to wire a ceiling fan with a separate remote receiver, use the wire nuts to:. Connect the black ungrounded wire from the ceiling to the black wire from the receiver. Connect the white grounded wire from the ceiling to both the white wire from the receiver and the white wire from the fan.

Connect the yellow wire from the receiver to the black wire from the fan. Connect the blue wire from the receiver to the blue wire from the fan. If you're installing a ceiling fan that requires a downrod, you'll need to finish installing the canopy.

If you're installing a low profile ceiling fan, you'll need to finish installing the motor housing. Lift the canopy into place, making sure the triangular openings and screw holes are aligned. Using a screwdriver, insert and securely tighten the canopy screws. A magnetic screwdriver will give you more visibility when securing the canopy.

Raise the motor housing up until it's correctly positioned over the motor and ceiling brackets. Rotate the motor housing until the screw holes are aligned with the holes on the bracket. The indentation inside the housing should lock into place with the notch inside the ceiling bracket. Hold the motor housing in place. Use a screwdriver to insert and tightly secure the four motor housing screws. Your Hunter fan comes with the necessary parts you'll need to install the blades.

There are three common blade installation methods for Hunter ceiling fans:. Use the respective screws to attach each blade to the blade irons. Position the blade irons with the motor, making sure all screw holes are properly aligned. Lightly hand-tighten the screws, then use a screwdriver to securely tighten the screws.

Insert the blades into the openings and align the hole openings in the blades with the blade irons. Attach each blade to a blade iron using the three provided blade washers and blade assembly screws. Make sure the screws are secured tightly. Squeeze the blade and the blade iron post together. Note that the flared tops of the blade iron posts will be fully visible above the blade when properly assembled. To assemble a fan with a lighting kit, first identify if your fan has a Quick Connect feature by examining the switch housing.

Hunter Quick Connect fans have a distinct locking mechanism located on the switch housing. These fans also have a ring that surrounds the switch housing in the middle. Hunter fans without Quick Connect technology do not have either feature. Connect the fan and light fixture plugs together. Make sure to align the colored markings on the connectors. Push the connectors and the extra wire into the hole located at the top of the light fixture. Carefully connect the light fixture to the bottom of the fan.

Make sure the holes on the mounting ring at the top of the fixture are aligned with the spaces in the mounting bracket on the bottom of the fan. While holding the body of the fan still, turn the light fixture clockwise to engage the locking pin. Listen for a clicking sound to verify that the locking pin is securely in place. After installing the glass, reinstall the light rings into the sockets. Use the socket ring glass tool that came with your fan to turn the light rings clockwise until they're tightened.

Choose any two holes in the switch housing mounting plate to screw two of the housing assembly screws halfway.

Feed the wire connector through the center of the upper switch housing. Wrap the keyhole slots around the screws then twist counterclockwise. Use a screwdriver to install the third screw then tighten the remaining two screws. Connect the upper and lower switch housing together using the plug connectors, making sure to line up the colored markings. Locate the notches in the sides of the lower switch housing and align them with the screws located on the upper switch housing.

Lock the switch housing into place by twisting the lower portion clockwise. Using a screwdriver, install the third housing screw. Tighten all the screws. To install the light shades, first, loosen the thumbscrews. Then, lift each shade to the light fixture and insert and tighten each thumbscrew. Connect the pull chain pendants to the appropriate short chains coming from the switch housing. Connect the fan and light fixture connectors.

Make sure you line up the colored markings on the connectors. Secure the connectors by pushing the connectors and extra wire into the hole located at the top of the light fixture. This step will ensure that the fan and light fixture are successfully mounted. Carefully lift the light fixture and position it at the bottom of the fan.

Make sure the holes on the mounting ring located on the top of the light fixture are aligned with the spaces in the mounting bracket located on the bottom. Listen for the clicking sound to verify the connection is secure. Lift the globe and use the provided three thumb screws to attach it to the light fixture. Tighten the thumbscrews by hand. Feed the fan pull chain through the hole at the bottom of the light kit.

Position both the globe and globe keeper against the metal plate, keeping them flush. Feed the light pull chain through the hole located in the center of the finial cap. Then, feed the fan pull chain through the hole located in the side of the cap.

Feed only the light pull chain through the finial. Attach the finial to the threaded rod and tighten by hand. Attach the short chains coming from the switch housing to the appropriate pull chain pendants.

Ceiling fans are not always increasingly more expensive as the blade span increases in size. Fan manufacturer Delmar suggests buying based on the square footage of a room.

Fan prices below are from Lowes. The standard minimum distance between the floor and the blades of a ceiling fan is around 7 feet.

For ceilings with a height greater than 8 feet, installers will use a pole to connect the motor housing of the ceiling fan to the ceiling mount. Here are the common downrod sizes based on ceiling height according to ceiling fan manufacturer Del Mar. Ceiling fans designed for exterior installation are designed to handle both a wetter and windier environment. In regards to the potential moisture exposure, the global safety consulting and certification company UL LLC has created three rating classifications so homeowners can safely purchase the right fan for the desired location.

For any bathroom, kitchen, or exterior ceiling fan installation on your property, check the UL rating on the fan to ensure it is adequate for that location to make sure you, your family, and your guests are protected. If the installation is for a room that has never had a ceiling fan before, then it will need to have a fixture and the required mounting kit installed before the fan can be mounted. However, costs go up depending on your answers to the following questions: [1].

Overhead lighting in living rooms is not typical. A switched receptacle is. The existing wires are usually a 3-wire feed.

With a fan weighing up to 50lbs. These are installed by attaching the mounting box to a support brace on the ceiling joists.